DPF cleaning near Aurora, Colorado Springs and Grand Junction - FSX DPF cleaning at McCandless …

Experience Superior DPF Cleaning at McCandless Truck Center

McCandless Truck Center offers industry-leading DPF (Diesel Particulate Filter) Cleaning at our Aurora, Colorado Springs, Grand Junction and N Las Vegas locations!

Experience the McCandless Difference with FSX TrapBlaster Pneumatic DPF Cleaning Technology! Utilizing patented technology, the FSX equipment cleans filters better than competing designs, or those using conventional pulse cleaning. Bi-directional scanning air knives allow for the cleaning of every cell, on BOTH sides of the filter. Scroll down to view comparison of cleaning technologies.

DPF Filters How They Work
  • BEST pricing for pneumatic cleaning in the Denver Metro Area (compared to others with the FSX equipment)
  • 94% ASH REMOVAL (20% More than those utilizing Pulse Technology)
  • LONGER INTERVALS Between Cleanings
  • IDENTIFY Potential Filter Deficiencies! Diagnostic capabilities detect failed cells.
  • INCREASE DPF Service Life!
  • AVAILABLE NIGHTS AND WEEKENDS!
Affordable Pneumatic DPF Cleaning in Colorado and Nevada

DPF Cleaning Technology Comparison

  • Conventional Pulse Cleaning

    (Offered by others)

    Attempts to clean 5000 cells at once. Center cells clean first, while outside cells get little cleaning. Cleaning stops when a path of least resistance is established, typically through the center of the filter only.

    Conventional Pulse Cleaning Diagram #1

    Process Time: 20 Minutes

    • Cleaning action is hidden
    • Cleans from only one end
    • Only cleans center cells
    • Cannot determine when cleaning is completed
    • NO Diagnostic Capability

  • FSX Trapblaster Air Knife Scanning Technology

    Cleans using Air Knife Scanning Technology (patented) on both ends of the filter. Every individual cell is cleaned numerous times from both directions, providing visible diagnostics and cleaning process.

    Conventional Pulse Cleaning Diagram #2

    Process Time: 22 Minutes

    • Visible cleaning action
    • Cleans from BOTH ends
    • Cleans ALL cells
    • Cleaning is completed when particulate is clear
    • Diagnostic Capability

*Pricing is subject to change and can vary by location. Please contact your McCandless Truck Center location for current availability and pricing information. We ALWAYS recommend that if you're cleaning your DPF, you clean the DOC as well. If we clean your DPF, we will clean your DOC at the same time, for free. If the DOC is brought in by itself or separately, there will be a separate charge.

We also recommend that after installing or cleaning a DPF, make sure a regeneration is run, and temperatures are watched with a diagnostic tool to ensure the system is operating correctly. Temperature should always increase across the DOC (catalyst), decrease across the DPF surface, and reach approximately 1100 degrees on the DPF outlet.

PLEASE NOTE: If DPF or DOC are wet from fuel, oil, or coolant, they cannot be cleaned and must be replaced.